General Specifications
Standard Evaporators ;
They contain a wide capacity range from 0,6 kW to 87 kW. (These capacity ranges are given for R404A refrigerant type.)
- High efficient aliminium fins
- 4-6-8-10 mm fin spacings
- The copper tubes in 3/8’’-1/2’’-5/8’’ in diameters
- Working capability with 404A, R 507A ve R 134A gases
- High pressured test in 35 bar
- High operating pressure till to 20 bar
- Sending by positive pressure pressing with nitrogen
They might be covered optionally with epoxy cover aluminium fin.
Technical Specifications
Standard Evaporators ;
Characteristics Of Casing:
- Hot-dip galvanized sheet
- Anti-rust and permanent electrostatic powder paint (RAL 7047)
- Hinged drain tray,
- Easily removed side covers by loosening the connection screw
- Ceiling mounting brackets
Characteristics Of Heaters:
E1 type heating resistor is used for 0°C and +5°C room temperature range. The resistors are only mounted on the cooling coil.
E2 type heating resistor is used for lower than 0°C room temperature. The resistors are mounted on the coil and on the drain tray.
Optional water defrost (WD) can be made.
- E1: Coil electrical defrost onlyt
- E2: Coil + drain tray electrical defrost
- E3: Coil + drain tray + electric fan defrost
Characteristics Of Fans:
- Energy-efficient and silent running fans
- The fan motors are equipped with insulation class B or F, protection class IP44 or IP54
|
Fan Diameter (mm) |
Fan Speed (fs/min) |
Phase / Voltage (V) / Frequency (Hz) |
Recommended Max. Operating Temperature (°C) |
| 300 |
1320 |
1 / 230 / 50 |
-25 / +60 |
| 350 |
1340 |
1 / 230 / 50 |
-25 / +65 |
| 400 |
1380 |
1 / 230 / 50 |
-25 / +40 |
| 450 |
1345 |
1 / 230 / 50 |
-25 / +60 |
| 500 |
1270 |
1 / 230 / 50 |
-25 / +65 |
| 630 |
860 |
1 / 230 / 50 |
-25 / +55 |
Show reviews in all languages (1)
Martin Norman –
Wide capacity range. Convenient for chiller and freezer rooms. Theese cold room evaporators are nice.
admin –
Mr. Norman, thanks for your comment.