General Specifications
Twin Flow Evaporators ;
They contain a wide capacity range from 3,9kW/123,8kW.
- High Efficient Aluminium Fins
- 4-6-8 mm fin spacings
- The copper tubes in ½’’ in diameters
- Working capability with 404A, R 507A ve R 134A gases
- High pressured test in 35 bar
- High operating pressure till to 20 bar
- Sending by positive pressure pressing with nitrogen
They might be covered optionally with epoxy cover aluminium fin.
Technical Specifications
Twin Flow Evaporators ;
Characteristics Of Casing:
Optionally, manufactured with stainless casing.
- Hot-dip galvanized sheet
- Anti-rust and permanent electrostatic powder paint (RAL 7047)
- Hinged drain tray,
- Easily removed side covers by loosening the connection screw
- Ceiling mounting brackets
Characteristics Of Heaters:
E1 type heating resistor is used for 0°C and +5°C room temperature range. The resistors are only mounted on the cooling coil.
E2 type heating resistor is used for lower than 0°C room temperature. The resistors are mounted on the coil and on the drain tray.
- E1: Coil electrical defrost only
- E2: Coil + drain tray electrical defrost
Characteristics Of Fans:
Optionally fans can be equipped with three phase motors
The electrical characteristics of the fans:
- Energy-efficient and silent running fans
- The fan motors are equipped with insulation class B or F, protection class IP44 or IP54
Fan Diameter (mm) |
Fan Speed (fs/min) |
Phase / Voltage (V) / Frequency (Hz) |
Recommended Max. Operating Temperature (°C) |
400 |
1380 |
1 / 230 / 50 |
-25 / +40 |
450 |
1345 |
1 / 230 / 50 |
-25 / +60 |
500 |
1270 |
1 / 230 / 50 |
-40 / +65 |
Reviews
There are no reviews yet.